 |
 |
 |
|
TITAN Professional Level
|
Standard
|
Gold (in Silver)
|
Gold (in Gold)
|
Sizes
|
120 - 200
|
130 - 180
|
130 - 180
|
|
Plate Color
|
Silver
|
Silver
|
Gold
|
Plate
Construction
|
Aircraft
Aluminum
|
Avional
Aluminum
|
Avional
Aluminum
|
|
Truck Color
|
Silver
|
Gold
|
Gold
|
|
Titanium
|
Pivot Pin & Axles
|
Pivot Pin & Axles
|
Pivot Pin & Axles
|
|
Toe Stop Thread
|
American
|
Metric
|
Metric
|
Model: AT 2001/L Titan
Sizes: 12 through 20 in 10mm increments.
Plate: Titanium components, Tilted Toe Stops, left (Sx) and right (Dx)
Steering: ATLAS Standard Trucks with the famous Top Down Click Action adjustment system
Trucks: ATLAS Standard Trucks with Titanium Pivot Pins and 7mm Titanium Axles
Cushions: Urethane Suspensions
The ATLAS TITAN Professional Level Skate is based on the World Renowned ATLAS AE 2001/L FreeStyle and Dance Skate but is lighter because of the Titanium parts being installed. The ATLAS Standard Truck utilizes a Titanium Pivot Pin and a 7mm Titanium Axle. The ATLAS famous Top Down Click Action Adjustment System which allows the Truck and Suspensions (Cushions) to be completely dis-assembled and re-assembled without changing the Action Adjustment is still a major part of the Standard Truck System
ATLAS TITAN Professional Level uses Urethane Suspensions (Cushions) in three (3) hardnesses. The Hardness of the Urethane Suspensions are based (from the Factory) on the size of the Frame, which also usually translates into the weight of the Skater. Smaller Size Frames use the Flexible Suspensions, Middle Size Frames use the Medium Suspensions, and the Larger Size Frames use the Hard Suspensions. The Suspensions used should be based on performance, not just the color desired.
ATLAS is in the process of changing the colors of the Urethane Suspension, so we will list both the Current Colors (which when gone will be replaced) with the New Colors. The hardnesses remain the same.
Flexible = Current is Red, New is Pink
Medium = Current is Blue, New is Clear Blue
Hard = Current is Yellow, New is Clear
TITAN Professional Level is provided with ATLAS Toe Stops (with appropriate thread), Axle Nuts, Dust Caps, Wheel Spacers, and a simple two (2) Wrench Set and a Set of Mounting Hardware. The Toe Stop Allen Screw (on the Standard Plate) uses a 5mm Allen Wrench.
Note: Silver Coloring consists of Anodized and Plated surfaces, not actual Silver.
|
|
|
 |
|
 |
|
