The CRAZY Skates APOLLO is a very High Performance Pre-Professional Skate and is the culmination of several years of intensive research and development to bring the very best COMFORT and PERFORMANCE to Skating and especially Derby Skating. Crazy Skates of Australia, has assembled a team of some of the best Skaters, Derby Skaters, Boot Makers, Design Engineers, Mechanical Engineers, and Chemical Engineers in the world to provide Skaters everywhere with a whole new level of Comfort and Performance. The CRAZY Skates APOLLO Skate (Frame) is used in the DBX J and DBX 1 complete Outfits and can be used with many other Skate Outfits as a very High Performance Pre-Professional Skate. The CRAZY Skates APOLLO Skate (Frame) is an exceptional design which utilizes the very best technologies that are available to create Magic in its performance. The CRAZY Skates APOLLO Plate is designed and formed of an ULTRA Lightweight rigid FiberGlass based Resin Composite which provides a GREAT looking Plate which is unsurpassed in Strength to Weight ratio. This ultra STRONG Pre-Professional Skate Frame has a Machined Aluminum Toe Stop insert formed directly and securely into the Skate Frame and utilizes an Allen Screw Adjustable Toe Stop (Not the typical Jam Nut found on most Skates in this price range) and professional Delrin Pivot Pin Inserts. The CRAZY Skates APOLLO Skate (Frame) uses the very same Truck Assembly as the Professional Venus Skate Frame with the very articulate 20 degree action that both rocks and turns like many of the best Artistic Skates in the World and with Trucks that use a single Adjustment Nut to articulate the Non-Click Action Adjustment. The CRAZY Skates APOLLO Skate King Pin is an actual King Pin of Stainless Steel made specifically to be a King pin (not just a standard bolt) that utilizes a special Locking Nut to secure it to the Plate and increase the Strength to stand up to the most rigorous usage. The standardized complete Truck Assembly assures consistent high levels of performance across the CRAZY Skates Frames, including the Venus and the Apollo. The Aluminum Truck is imbedded with a highly precision 8mm Axle and a hardened steel Pivot Pin. The Core of the Truck assembly, where the Cushions (Suspensions) are seated is larger, allowing for the Larger Upper Cushion to go through the Core of the Truck and touch the Smaller Lower Conical Shaped Cushion. This design Totally Encapsulates the King Pin creating the magic feel of a very Stable, Smooth, Fast, and Articulate Action, providing GREAT Edging and Total Control of the CRAZY Skates APOLLO Skate. The CRAZY Skates APOLLO Skate (Frame) comes complete with one (1) set of Highly Reactive, Fast Snap-Back, Black Rubber Cushions. One set will be installed on the Skates. The Upgraded High Rebound Urethane Cushions can be purchased as an accessory for the APOLLO Skate as whole sets that can be mixed and matched as desired. These are the Urethane Cushions that come standard on the Venus Skates and are completely interchangeable between the APOLLO and the Venus Skates.
The Soft or Flexible Cushions are Green.
The Mid or Medium Cushions are Clear.
The Firm or Hard Cushions are Purple.
There is a fourth hardness that is available only as an optional Accessory.
The Xtra-Firm or Xtra Hard Cushions are Blue.
These Cushions can be swapped very easily and also mixed and matched to create many combinations.
Remember that the Larger Upper Cushion is the one that that goes through the Core of the Truck and provides the Stability of an Edge and should most always be the Stiffer Cushion if they are mixed and matched. The Smaller Lower Conical Shaped Cushion provides the quick and sharp movements and should most always be the Softer Cushion if they are mixed and matched. The CRAZY Skates can be outfitted with any of the CRAZY Skates Toe Stops including the Arrow, Lil Block, and Block Toe Stops as an accessory. All CRAZY Skates Toe Stops are made of very durable Rubber with flat bottoms to help for that et Up and Run?needed for Derby or FreeStyle Skating. The Toe Stops are American (SAE) Thread. The CRAZY Toe Stops are adjusted in the APOLLO Plate by an Allen Screw that uses a Standard 3/16ths inch Allen Wrench or Allen T-Wrench. CRAZY Skates APOLLO comes with a complete set of Mounting Hardware ?Including Mounting Bolts, internal Bridges, and locking Nuts for a six (6) point mount per Skate. This Mounting Hardware is designed specifically for CRAZY Skates DBX Boots to be mounted with the optional accessory CRAZY Skates Power Wedges, providing the exact correct lengths of the Bolts, so NO cutting the Bolts. What comes with the CRAZY Skates APOLLO Skates: includes the APOLLO complete Skates, one (1) set of Rubber Cushions (on the Skates), a pair of Power Wedges, a set of Mounting Hardware, a set of 8 Spacers, a set of 8 Axle Nuts, and a set of two (2) tools including a Plus sign (+)-Style Multi-Wrench and a 3/16ths Allen Wrench. *****************************
Plate Sizes Axle Spread Fits Boot Sizes
205mm 110.0mm 32-33-34
225mm 130.0mm 35-36-37
245mm 150.0mm 38-39-40
265mm 172.0mm 41-42-43
285mm 190.0mm 44-45-46-47 BLACK OR GREY ONLY
