AE2006/S Circle Master Plates

Circle Master Professional Series 

Sizes: 130 through 160

Plate: Aircraft Aluminum Die Cast Frame with good Strength. 

Steering: ATLAS Standard Trucks (in Silver) with the famous Top Down Click Action adjustment system

Trucks: ATLAS Standard Trucks (in Silver) with Adjustable Steel Pivot Pins and 7mm Steel Axles 

Cushions: Rubber Suspensions 


The ATLAS Professional Series is the best Figure and Dance frame ATLAS has to offer. The CircleMaster is Die Cast in Aircraft Aluminum, which is strong and Lite and DOES NOT have a Toe Stop position. The ATLAS Circle Master Professional Series is recommended for both Loop Figures and the Large Circles. The ATLAS Standard Truck (in Silver) utilizes a Steel Pivot Pin and a 7mm Steel Axle. The ATLAS famous Top Down Click Action Adjustment System which allows the Truck and Suspensions (Cushions) to be completely dis-assembled and re-assembled without changing the Action Adjustment is still a major part of the Standard Truck System 
ATLAS uses Rubber Suspensions (Cushions) in three (3) hardnesses (Urethane Suspensions are an optional extra) . The Hardness of the Rubber Suspensions are based (from the Factory) on the size of the Frame, which also usually translates into the weight of the Skater. Smaller Size Frames use the Flexible Suspensions, Middle Size Frames use the Medium Suspensions, and the Larger Size Frames use the Hard Suspensions.

The Suspensions used should be based on performance, not just the color desired.

ATLAS is in the process of changing the colors of some of the Rubber Suspensions, so we will list both the Current Colors (which when gone) , will be replaced with the New Colors, the hardnesses remain the same. 

Flexible = Current is Blue Medium = Current is Black Hard = Current is Yellow, New is Natural (Amber or Brown) 

ATLAS Figure plates are supplied with the following: Mounting Hardware Kit, Axle Nuts, Dust Caps, Wheel Spacers, and a simple two (2) Wrench Set. Everything is Metric. 

Please note that this chart lists all manufacturers. Find your boot size in the far left column, and match it up to the size listed in the Atlas column (2nd from the right). Please note that these sizes drop the "0" from the end of the size. For example, 12 = 120.